|
At Poolside: Connect the INTAKE HOSE to the pump inlet.
Drop the other end of the intake hose into the pool.
Close Pump Drain and Garden Hose Outlet.
Leave the Cap on the PUMP OUTLET (hand tight).
Open the PRIMER VALVE, operate the PRIMER LEVER until water flows from the top of the PRIMER PUMP - DO NOT Pull Primer
Lever too hard or too far. Close the PRIMER VALVE.
Connect FIRE HOSE and NOZZLE - CLOSE The NOZZLE.
Turn GAS VALVE ON, CHOKE LEVER ON, IGNITION SWITCH ON.
Pull Starter Rope. TURN CHOKE OFF 5 Seconds after engine starts.
Operate Engine at 1/2 to Full Throttle to Adjust Water Pressure.
After Use:
Turn Ignition Switch OFF, Gas OFF, Choke ON after shutdown.
Drain Pump Completely After Each Use.
Drain Fire Hoses for 24 Hours Before Storing.
|
